The site work division of ICFHome.ca · Building since 1979 · Insured to $2,000,000 · 705-533-1633
Small Jobs and Mini Excavator Work
Not every job is a whole lot. A trench to the garage, footings for an addition, a couple of stumps, a culvert that has heaved. This is what the mini excavator is for.
Updated November 2026 · Georgian Bay Siteworks, the site work division of ICFHome.ca
Small jobs we get asked for
- Trenching for a water line, hydro to a garage or shop, or a drain. See trenching.
- Footings for an addition, garage, deck or bunkie. See footing depth and frost.
- A few stumps ground down or dug out.
- Culverts replaced or reset. See entrance permits and culverts.
- Driveway repairs: potholes, washouts, a regrade and a top-up. See fixing a gravel driveway.
- Drainage fixes: a swale, a French drain, regrading beside the house. See grading and drainage cost.
- Tight spots a full-size machine cannot reach. See mini excavator service.

What a small job really costs
The digging is often the small part of the bill. What you are paying for:
- Machine and operator, by the hour or as a fixed price.
- Float. Getting the machine to you and home again, roughly $500 to $1,000.
- A minimum. A machine that travels an hour to dig for forty minutes still used up half a day.
- Materials and trucking, if anything comes in or goes out.
So the trick with small jobs is to make one trip count. If you have a trench, two stumps and a soft spot in the driveway, tell us about all three. The full breakdown is in the excavation cost guide.
Before we dig, even on a small job
Locates are free and required by law, and they are the reason a ten-minute trench sometimes waits a week. We arrange them. Ontario One Call does not mark private lines such as the wire to your shed or the pipe to your well, so tell us what you know is buried.
Frequently Asked Questions
Is my job too small?
Call and ask. If the machine can do it in one visit, it is worth a conversation, and several small jobs together make the trip worthwhile.
How much does a mini excavator cost per hour?
Roughly $120 to $185 an hour with an operator in Ontario in 2026, plus float.
Do I need locates for a small trench?
Yes. Any digging needs locates first. They are free and we arrange them.
More about working with us
Did Not Find Your Question?
Call 705-533-1633 or send us the address and what you are planning. We answer the phone, and we give prices in writing.
Rather we call you?
Leave your name, number and town. We call back weekdays and give you a price in writing. Privacy policy.
